RC4000 ACU Boardset
2.1.2.1.2 J2 - DC power
Designation
J2
"+24 Power"
The Power/Drive Board will be used to provide 24 VDC power to other cards in the boardset. Typically
pins 1 & 2 will start the DC power distribution "daisy chain" by supplying power to the computing/interface
card.
2.1.2.1.3 J3 - Interboard Bus B
Designation
J3
Drive control signals from the processor card are provided to the Drive board via Bus B.
Signal details for Bus B are provided in
2.1.2.1.4 J4 - JTAG
Designation
J4
unmarked
J4 provides for factory programming of the Drive Board's microcontroller.
Chapter 2
PCB
Pin Count
6
PCB
Pin Count
"Bus"
40
section
2.1.2.2.1.
PCB
Pin Count
10
16
Connector
Molex Friction Lock Header
Connector
Right Angle Shrouded Header
Connector
Right Angle JTAG
Hardware
Type #
2
Type #
3
Type #
4