Table of Contents
Advertisement
RC4000 ACU Boardset
Chapter 2
Hardware
2.1.2.1.6 J6 - DC Power Input
Designation
PCB
Pin Count
Connector
Type #
J6
--
3
Phoenix Terminal Header
1
If an optional AC power supply is not present, DC input must be provided to connector J6, pins 1 & 2. If
an AC power supply is present, leave pins 1 & 2 open (This connector will not be installed on the circuit
board when the AC power supply is used).
Sizing of the DC input should consider all the power requirements discussed in
section
2.1.2.1.1.
18
Advertisement
Table of Contents
