RC4000 ACU Boardset
3.3.2 Maintenance Items
1-VOLTS
5-LIMITS
9-FG CAL
This screen provides a menu system for selecting the various maintenance screens described in the
following paragraphs. Pressing the Mode key from this screen will return the controller to the CONFIG-
MENU screen.
Note that if expert access is not enabled, selections 9 (fluxgate calibration) and 0 (shake) are not made
available.
Chapter 3
2-DRIVE
3-TIME
6-GPS COM 7-CMP COM 8-MOVETO
0-SHAKE
130
MAINT
.-SYS INFO
Software