Table of Contents
Advertisement
RC4000 ACU Boardset
STORED SATELLITE: BRASIL A1
SELECT SAT(SCROLL UP/DOWN) <ENTER>
AUTOMATIC ANTENNA STOWING. From STOW mode, the user may ask for the antenna to be
automatically moved to the stow position.
AZIM: -42.5 (
ELEV:
MOVING TO (TARGET),<STOP> TO HALT MOTION
Programming Group Functions
The programming group modes provide for initial configuration of the controller and also provide screens
to aid in maintenance and troubleshooting.
Configuration mode screens allow the user to customize and calibrate the operation of the RC4000 for
use with a particular mount. Note that most configuration items will be factory set for correct operation
with a particular mount.
REF_VOLT:2.50 OFF:
CCW:180
SET REFERENCE VOLTAGE <2.00 - 3.00>
Maintenance mode screens allow the user to monitor sensor inputs and perform periodic maintenance
actions such as setting time and resetting drive errors.
SYSTEM:11/10/97 22:26:40
GPS UTC:11/10/97 22:26:40
DISPLAY:11/10/97 16:26:40
1-DATE 2-TIME 3-SYNCH 4-ZONE 5-OFFSET
Chapter 1
0.0)
23.4 (-67.5)
0.0
CW:180
SF:76.35
6
RECALL
STOW
CONFIG-AZIM
TIME
ZONE:CST
OFFSET:- 6
Introduction
Advertisement
Table of Contents
