Table of Contents
Advertisement
RC4000 ACU Boardset
3.3.1.3.11 SHAKE
AZ 1: -40.0 2:
EL 1:
PL 1: -10.0 2:
MOVE 1 AZIM <-180.0/180.0>
AZ #:
The AZ field allows the user to specify the azimuth target for moves 1, 2 or 3.
EL #:
The EL field allows the user to specify the elevation target for moves 1, 2 or 3.
PL #:
The PL field allows the user to specify the polarization target for moves 1, 2 or 3.
CYCLE:
The CYCLE field allows the user to specify the total number of movement cycles the SHAKE function will
perform.
DELAY:
The DELAY field allows the user to specify the amount of time (in seconds) that the SHAKE function will
wait between "moves". Specifying a value of 0 will cause no delay between "moves".
50.0 3:
30.0 2:
40.0 3: -67.5 CYCLE: 100
10.0 3:
MOVE # AZIM <-180.0/180.0>
MOVE # ELEV <-90.0/90.0>
MOVE # POL <-180.0/180.0>
NUMBER OF SHAKE CYCLES <1-9999>
DELAY <0-999 SECONDS>
129
Chapter 3
0.0 CONF-SHAKE
0.0 DELAY:
15
Software
Advertisement
Table of Contents
