Table of Contents
Advertisement
RC4000 ACU Boardset
The values for the time parameters may be altered by the actions described next:
1-DATE
This action allows the user to manually set the date. The prompt indicates that the / delimiter for date is
entered by using the (decimal point) key.
2-TIME
This action allows the user to manually set the system time. The prompt indicates that the : delimiter for
time is entered by using the (decimal point) key.
3-SYNCH
If valid GPS UTC data is being received, pressing the 3 key will cause system time to be synchronized
with the current GPS UTC.
4-ZONE
The user may enter three alphanumeric characters (ex. CST) for a time zone designator.
5-OFFSET
The user may enter the number of hours of offset from system time for offsetting displayed time.
3.3.2.4 TBD Maintenance
Selection number 4 on the Maintenance menu has not been allocated yet.
ENTER DATE DD.MM.YY
ENTER TIME HH.MM.SS
ENTER 3 LETTER TIME ZONE
ENTER TIMEZONE OFFSET <-11/+12 HOURS>
134
Chapter 3
Software
Advertisement
Table of Contents
