Avaya S8300 Manual page 40

Converting an S8300 from LSP to ICC and upgrading Communication Manager from 2.0.x to 2.x
11. Install post-upgrade
service pack file, if any.
Page 260.
12. Install the new ICC
license file.
Starting on page 263.
13. Install the new
authentication file.
Starting on page 264.
14. Configure server.
Starting on page 464,
ending on page 478.
15. Administer the new
ICC.
Start on page 157.
40 Converting an Avaya S8300 Media Server Between ICC and LSP Modes
Task Steps/Comments
Skip the Verify Media Server Configuration
section starting on page 247.
Fill in each Configure Server screen with
data for the ICC. Some of the configuration
data will be the same as that for the LSP.
If enabling IA770 H.323 Integrated
Messaging, fill in the Ethernet 1
Integrated Messaging fields on the
Configure Ethernet Interfaces Web
screen.
If retaining CWY1 IA770 messaging
integration, leave the Ethernet 1
Integrated Messaging fields on the
Configure Ethernet Interfaces Web
screen blank.
On the Configure Local Survivable
Processor screen (page 123), select the
radio button that indicates this is NOT a
local survivable processor.
Assign node names.
Administer network regions.
Associate other LSPs (if any) with a
network region.
Administer the LSP screen.