Answer A Call Using Power Fail Back-Up Mode - Oricom CARE620 Series User Manual

Notes:
*: the period of power fail back-up for basic call operation depends on
the nearby environment, battery level and phone settings.
If the registered handset(s) is out of the base unit , it will display "PUT
ON BS" when mains power interruption occurs. Place the handset with
sufficient battery power (not lower than
activate Power Fail Back-Up and start up the base.
If handset is already on the main base unit it will automatically activate
the Power Fail Back-Up mode and start up the base until handset shows
"POWERING".
Make a call using Power Fail Back-Up mode through Handset only
Once the handset is placed onto the main base unit, enter the telephone
number, and then press
automatically and call is made.

Answer a call using Power Fail Back-Up mode

Please Note: This will not work if connected to the NBN or via an ATA.
It will only work when connected to a battery backed system.
1. When the phone rings, keep the handset on the main base unit and
press
be turned on automatically and call is answered.
2. To end the call, press
• Power Fail Back-Up mode will not work if the handset battery power is
not sufficient.
• Do not pick up the power supplying handset from base when Power
Fail Back-Up mode is activated.
• In power failure back-up mode, some functions including answering
machine and call blocking will not operate.
• If there is more than one handset registered to the base, 1 of the
handsets should be put on the main base unitand you can use the
other handset(s) to make calls like normal.
to answer the call. The speakerphone of the handset will
) onto the main base unit to
. The speakerphone will be turned on
.
37
PHONE SETTINGS