Smart Call Block Functions; Call Block Overview - Oricom CARE620 Series User Manual

SMART CALL BLOCK FUNCTIONS

SMART CALL BLOCK FUNCTIONS
This telephone is built-in with Smart Call Block feature*. This feature will
help you avoid nuisance calls by only allowing some numbers to make
your phone ring.
Default setting of Smart Call Block in this telephone is OFF but you
can enable it via your phone settings, as explained in the following
paragraphs.
* This feature requires a subscription of Caller Line Identification service
from your telephone service provider.

CALL BLOCK OVERVIEW

Setting
OFF
ON
CONTACTS
VIPS
ANONYM
Explanations
Call Block function (Block all call with numbers) is
Disabled. This is the default mode.
Call Block function is set to Manual. Numbers
registered in the block list will not go through and the
phone will ring silently.
Numbers can be added to the list while the phone is
ringing and/or after a call.
In this automatic mode, any number not registered
to your phonebook will be automatically blocked, you
phone will not ring. All calls from contacts registered to
your phonebook will proceed normally.
When this mode is chosen, CONTACTS OK is
displayed on LCD in standby mode unless you have
unread messages/missed calls.
In this second automatic mode, only calls from
contacts registered as VIP in your phonebook will go
through and ring. Any other number will not ring. When
this mode is chosen, VIPS OK is displayed on the LCD
in standby mode unless you have unread messages/
missed calls.
This extra feature allows you to block calls that do
not have a number attached to them (ie private calls,
international calls, etc). This option can be enabled in
addition to any of the previous four.
20