Set the Ringer Volume (for CARE820)
1. Press <MENU/OK> then <UP> or <DOWN> to select BS SETTINGS.
2. Press <MENU/OK> then <UP> or <DOWN> to select RING
VOLUME.
3. Press <MENU/OK> then <UP> or <DOWN> to select the desired
ringer volume (a total of 6 ringer volume levels including OFF).
Note: The respective ringer volume will be played during your selection.
4. Press <MENU/OK> to confirm.
De-register a Handset
You need to to enter the 4-digit PIN in order to de-register a handset
from the base station. (default PIN is 0000)
Note: You cannot de-register the handset that you are currently using.
1. Press <MENU/OK> then <UP> or <DOWN> to select BS SETTINGS.
2. Press <MENU/OK> then <UP> or <DOWN> to select DELETE HS.
3. Press <MENU/OK> you are then requested to enter the 4-digit
system PIN.
4. Enter the 4-digit system PIN.
5. Press <MENU/OK>, a list of registered handsets is displayed.
6. Press <UP> or <DOWN> to select one of the handsets that you want
to de-register.
7. Press <MENU/OK> to confirm.
Change the Flash Time
The flash time setting is country dependent. Please contact your local
telephone service provider for the correct settings.
1. Press <MENU/OK> then <UP> or <DOWN> to select BS SETTINGS.
2. Press <MENU/OK> then <UP> or <DOWN> to select FLASH TIME.
3. Press <MENU/OK> then <UP> or <DOWN> to select your desired
flash time (SHORT, MEDIUM, LONG).
4. Press <MENU/OK> to confirm.
31
PHONE SETTINGS