Display Icons And Symbols - Oricom CARE620 Series User Manual

GETTING TO KNOW YOUR PHONE
XX/FF Flashing XX alternatively with FF: There are XX new voice
messages received where XX is from 01 to 59 and the TAM
memory is full.
FF Flashing FF: TAM memory is full and there are no new
messages, only old messages are kept in TAM memory.
- - /XX Flashing XX alternatively with - -: Time is not set and there
are XX new voice messages received where XX is from 01 to
59.
- - Flashing - -: Time is not set and there are old voice messages
kept in the TAM memory only (no new voice messages).
XX Steadily ON: Playing the current XX incoming message.
A1/A2 Steadily ON: Playing the current outgoing message (OGM)
where A1 is the Answer & Record OGM and A2 is the
Answer Only OGM.
XX/An Flashing XX alternatively with An: XX new incoming message
is now recording. An denotes that the incoming message
recording is in progress.
rA Flashing: Remote access is in progress.
LX Steadily ON: Indicates the current volume level where X is
from 1 to 8 (non-cyclic).
10. PAGE
Press to page your handset(s). It will ring for approximately 60
seconds.
Press and hold to enter registration mode for 5 seconds

Display Icons and Symbols

The LCD display gives you information on the current status of the
telephone.
14