Add Numbers To Blacklist; Edit Numbers In Blacklist - Oricom CARE620 Series User Manual

SMART CALL BLOCK FUNCTIONS

Add numbers to Blacklist

In standby mode,
1. Press <C> key, BLOCK SET. is displayed, or
Press <MENU/OK> to press <UP> or <DOWN> to select CALL BLOCK,
press <MENU/OK> to show BLOCK SET.
2. Press <UP> or <DOWN> to select BLOCKLIST.
3. Press <MENU/OK>, press <UP> or <DOWN> to select ADD, enter
number to be blocked, press <MENU/OK> to save.
NOTE: 2 more ways to add incoming and outgoing call numbers in Block
list:
1. From incoming call numbers
- Press <MENU/OK>, press <UP> or <DOWN> to select CALL LIST.
- Press <MENU/OK>, press <UP> or <DOWN> to select call list entry.
Press <MENU/OK>, press <UP> or <DOWN> to select to ADD to
-
BLIST.
- Press <MENU/OK> to show selected number, press <MENU/OK> to
save to Block list.
2. From outgoing call numbers
- Press <DOWN>, press <UP> or <DOWN> to select redial list entry.
Press <MENU/OK>, press <UP> or <DOWN> to select to ADD to
-
BLIST.
- Press <MENU/OK> to show selected number, press <MENU/OK> to
save to Block list.

Edit numbers in Blacklist

In standby mode,
1. Repeat step 1 and 2 in "Add numbers to Blacklist".
2. Press <MENU/OK>, press <UP> or <DOWN> to select EDIT, press
<UP> or <DOWN> to select number to be edited, press <MENU/OK>
to edit, and then press <MENU/OK> to save.
22