Store A Redial Number Into The Call Block List; Delete A Redial Number; Delete The Entire Redial List; Find The Handset - Oricom CARE620 Series User Manual

USING YOUR PHONE

Store a Redial Number into the Call Block list

1. Follow Steps 1 and 2 in "redial a number".
2. Press <MENU/OK> and <UP> or <DOWN> to select ADD TO BLIST.
3. Press <MENU/OK> to edit the number if necessary.
4. Press <MENU/OK> to confirm to save it in Call Block List.

Delete a Redial Number

1. Follow Steps 1 and 2 in "redial a number".
2. Press <MENU/OK> and <UP> or <DOWN> to select DELETE, press
<MENU/OK>, CONFIRM? is shown.
3. Press <MENU/OK> to confirm.

Delete the Entire Redial List

1. Follow Steps 1 and 2 in "redial a number".
2. Press <MENU/OK> and <UP> or <DOWN> to select DELETE ALL.
3. Press <MENU/OK>, CONFIRM? is shown.
4. Press <MENU/OK> to confirm.

Find the Handset

You can locate the handset by pressing <PAGE> on the base station.
All the handsets registered to the base will produce the paging tone and
"PAGING" is displayed on the LCD. You can stop the paging by pressing
< TALK ON> / <TALK OFF> / <C>/<OK/MENU> on any handset or
<PAGE> on the base again.
Note: If there is an incoming call during paging, the phone will ring with
the incoming call instead of paging.
Make an Internal Call
This feature is only applicable when there are at least two registered
handsets. It allows you to make internal calls, transfer external calls from
one handset to another handset and make conference calls. If the called
handset is not answered within 60 seconds, the called handset will stop
ringing and the calling handset will return to standby mode.
18