Alarm Settings; Set The Date And Time; Turn On/Off The Alarm; Registration - Oricom CARE620 Series User Manual

PHONE SETTINGS

Set the Date and Time

1. Press <MENU/OK> then <UP> or <DOWN> to select HS SETTINGS
2. Press <MENU/OK> then <UP> or <DOWN> to select DATE & TIME.
3. Press <MENU/OK> then <UP> or <DOWN> to select SET TIME.
4. Press <MENU/OK> to enter the time information.
5. Press <MENU/OK> to enter the date information.
6. Press <MENU/OK> to confirm.

Alarm Settings

You can use this phone to set an alarm clock. When an alarm is set, the
<ALARM Icon> displays on the LCD. When the alarm time is reached,
the <ALARM icon> and "ALARM ON" flash on the LCD ringing with the
alarm melody for a duration of 30 seconds. You can press any key to
disable the alarm. If snooze function is activated, the alarm will sound
again at the end of the snooze period of seven minutes.
Note: The alarm volume level is the same as the settings of the handset
ringer volume. If the handset ringer is set to OFF, the alarm still sounds
at VOLUME 1 level.

Turn on/off the Alarm

1. Press <MENU/OK> then <UP> or <DOWN> to select HS SETTINGS
2. Press <MENU/OK> then <UP> or <DOWN> to select ALARM.
3. Press <MENU/OK> then <UP> or <DOWN> to select ON/OFF.
4. Press <MENU/OK> to confirm.
Note: If ON is selected, you will be asked to set the alarm time.
1. Enter the alarm time.
2. Press <MENU/OK> to set the snooze function.
3. Press <MENU/OK> then <UP> or <DOWN> to select ON or OFF.
4. Press <MENU/OK> to confirm.

Registration

Your handset and base station is pre-registered. Up to 4 handsets can
be registered to a single base station. For new handset, registration is
required before use:
35