Set Alert Tones; Rename The Handset; Set The Auto Answer - Oricom CARE620 Series User Manual

4. Press <MENU/OK> then <UP> or <DOWN> to select the desired
ringer volume (a total of 6 ringer volume levels including OFF).
Note: The respective ringer volume will be played during your selection.
If OFF is selected, <Ringer Off> icon will display.
5. Press <MENU/OK> to confirm.

Set Alert Tones

A single beep is emitted when you press a key. You can turn on or off
the key tone. You can also turn on the alert tones when low battery and
out of range are detected. Low battery tone will sound when phone is in
use to alert you that you need to charge up your battery.
1. Press <MENU/OK> then <UP> or <DOWN> to select HS SETTINGS.
2. Press <MENU/OK> then <UP> or <DOWN> to select TONE SETUP.
3. Press <MENU/OK> and <UP> or <DOWN> to select KEY TONE /
BATTERY TONE / OUT OF RANGE.
4. Press <MENU/OK> then <UP> or <DOWN> to turn on or off these
tones.
5. Press <MENU/OK> to confirm.

Rename the Handset

1. Press <MENU/OK> then <UP> or <DOWN> to select HS SETTINGS.
2. Press <MENU/OK> then <UP> or <DOWN> to select RENAME HS.
3. Press <MENU/OK> then enter the name of your handset.
4. Press <MENU/OK> to confirm.

Set the Auto Answer

If you turn on Auto Answer, you can pick up the call from the cradle to
answer a call without needing to press any key.
1. Press <MENU/OK> then <UP> or <DOWN> to select HS SETTINGS.
2. Press <MENU/OK> then <UP> or <DOWN> to select AUTO
ANSWER.
3. Press <MENU/OK> then <UP> or <DOWN> to turn on or off the auto
answer feature.
4. Press <MENU/OK> to confirm.
33
PHONE SETTINGS