Table of Contents
Advertisement
AUTOCLEAN
The AUTOCLEAN function is for use with application software that does not support automated cleaning of the drive head.
Applications that support automated cleaning manage tape location and use, including that of the cleaning cartridge. Do not use the
AUTOCLEAN function if your application software supports automated cleaning cycles.
Enabling AUTOCLEAN
The default condition is AUTOCLEAN Off.
After entering the dIAG MENU, press the MODE button until AUTOCLEAN appears on the LCD:
Press the SELECT button to access the AUTOCLEAN function. The following message will be displayed on the LCD:
Press the SELECT button to enable the AUTOCLEAN function. The following blinking message will be displayed on the
LCD:
Place the cleaning cartridge in slot 2, then press SELECT. FastStor will move the cartridge from slot 2 to slot
42
Troubleshooting and Diagnostics
Note
AUTOCLEAN
2
3
4
5
6
AC oN
3
4
5
6
CT 2 (SEL)
2
3
4
5
6
7
7
7.
Advertisement
Table of Contents
Need help?
Do you have a question about the FastStor FastStor Mass Storage Device and is the answer not in the manual?
Questions and answers