Upgrade Drive Firmware - ADIC FastStor FastStor Mass Storage Device Installation And Operating Manual

Press SELECT again to return the number of times that FastStor has picked a cartridge from any of the front slots. The
display will appear similar to the following:
Press NEXT to access the next event.
The events that FastStor keeps track of are listed below:
Front Pick Cartridge
Rear Pick Cartridge
Drive Pick Cartridge
Front Place Cartridge
Rear Place Cartridge
Drive Place Cartridge
Drive Door Retries
Pressing SELECT when the return value for dRV dR RE is displayed will return FastStor to LdR REAdY. Also, pressing the
MODE button at any time will return FastStor to LdR REAdY.

UPGRADE DRIVE FIRMWARE

The following procedure is to be used only when you are upgrading the drive firmware using a Firmware Upgrade (FUP) tape.
After entering the dIAG MENU, press the MODE button until the following appears on the LCD:
Press SELECT to begin the drive firmware upgrade process. The following message will be blinking on the LCD:
46 Troubleshooting and Diagnostics
(000000XX)
2 3 4 5 6
Front Pick Retries
Rear Pick Retries
Drive Pick Retries
Front Place Retries
Rear Place Retries
Drive Place Retries
UPG rv fw
1 2 3 4 5 6
Ct 2 (sel)
1
2 3 4 5 6
7
7
7