Eaton EMS2 Series Manual page 50

7 Technical data
Size/feature
Connections
Cross-section - control cables
Cross-section - power cables
Tightening torque
Stripping length
Supply of the device / the control inputs
Overvoltage category
Supply
Rated control voltage U
S
Range of the control supply voltage
Rated control current I
S
Protection against overvoltage
Protection against polarity reversal
Control inputs
Rated actuating voltage U
C
Rated actuating current I
C
Switching threshold
Protection against polarity reversal
Typical break time
46
EMS2-...-24VDC
EMS2-D(R)O-T-...:
Push in terminals
0.2 mm² - 2.5 mm²
AWG 24 - 14
EMS2-D(R)O-Z-...:
Screw terminals
0.14 mm² - 2.5 mm²
AWG 24 - 14
EMS2-D(R)O-T-...:
Push in terminals
0.2 mm² - 2.5 mm²
AWG 24 - 14
EMS2-D(R)O-Z-...:
Screw terminals
0.2 mm² - 2.5 mm²
AWG 24 - 14
EMS2-D(R)O(S)-Z-...: 0,5 Nm - 0,6 Nm
(5 lbs-ins - 7 lbs-ins)
EMS2-D(R)O(S)-T-...: –
EMS2-D(R)O-T-...: 10 mm
EMS2-D(R)O-Z-...: 8 mm
III
24 V DC
19.2 V DC - 30 V DC
40 mA
Yes
Yes
24 V DC
5 mA
For devices with safety function:
EMS2-D(R)OS-...-...-24VDC: 10 mA
LOW < 9.6 V DC
HIGH > 19.2 V DC
Yes
< 30 ms
EMS2... Electronic motor starter 10/19 MN034003EN www.eaton.com
EMS2-...-230VAC
Screw terminals
0.14 mm² - 2.5 mm²
AWG 26 - 14
Screw terminals
0.2 mm² - 2.5 mm²
AWG 24 - 14
0.5 Nm - 0.6 Nm
(5 lbs-ins - 7 lbs-ins)
8 mm
III
230 V AC
85 V AC - 253 V AC
4 mA
Yes
No
230 V AC
7 mA
LOW < 44 V AC
HIGH > 85 V AC
No
< 70 ms