Advertisement
Quick Links
Memshield 3 250A Panelboard/Pan Assemblies
EPBN1425, EPBN1625, EPBN1825, EPBN11225
EPBPN1425, EPBPN1625, EPBPN1825, EPBPN11225
Instruction leaflet LT1208 (12/19)
IMPORTANT NOTES
1. This product should be installed, commissioned and maintained by or under the supervision of a competent electrician
in accordance with current electrical engineering Codes of Practice, Regulations for the Electrical equipment of
Buildings (BS7671), CDM2007 - Construction (Design and Management) Regulations 2007, HSG150 - Health and
Safety in Construction, Statutory requirements and any Specific instruction issued by the Company.
2. After completing the installation and testing of this product it is essential that this leaflet is drawn to the attention of
the person responsible for its future operation and maintenance, and is at all times available for ready reference.
3. These notes assume throughout that the product is disconnected from the supply. It is essential that this is done
before any work is carried out.
4. These Panelboards are only designed for use with Eaton MCCBs. Failure to comply will result in invalid warranty and certification.
5. Operation of the incoming and outgoing devices should only be carried out by an instructed or skilled person.
250A MCCB INCOMER FITTING EPBKN1253, EPBKN1254
NOTE: When Top Fed, MCCB terminations must be reversed
250A DIRECT CABLE INCOMER FITTING EPBKN125L
Click into
Cover aperture
OUTGOING MCCB AND BLANK FITTING EPBN1BP1
Locate
and click
IMPORTANT:
Fit MCCB with the adjustment
dial end towards the Busbar.
14Nm
15Nm
14Nm
14Nm
15Nm
6Nm
(Terminal Screw)
250A PAN ASSEMBLY DIMENSIONS
EPBPN1425 - EPBPN11225
177.8
Min
Inside
Door
A
B
C
459
10.5
CAT N0.
A
B
EPBPN1425
29.5
483
EPBPN1625
29.5
578.5
EPBPN1825
131
669
EPBPN11225
131
850
250A CABLE BOX, EXTENSION BOX, FILLER BOX AND
DIN ENCLOSURE
EPBN1425SXB -
EPBN11225SXB,
EPBN1XE250,
EPBN1CX250,
EPBN1EXDIN
Box fixing
NB - Provision to reposition Earth
Terminals in Cable Box
123
InsideCover
COVER APERTURES
69.5
69.5
152.5
D
108.1
130
M5
Fixings
102
10.5
All Dimensions
C
D
in millimetres
592.5
181.5
683
272
773.5
362.5
954.5
543.5
Advertisement
Related Manuals for Eaton Memshield 3 Series
Summary of Contents for Eaton Memshield 3 Series
- Page 1 4. These Panelboards are only designed for use with Eaton MCCBs. Failure to comply will result in invalid warranty and certification. 5. Operation of the incoming and outgoing devices should only be carried out by an instructed or skilled person.
- Page 2 Intellectual Property Rights Shield Eaton wishes to make it clear that it owns intellectual property rights in the product which it manufactures (whether or not listed in this leaflet) and that it will take legal action against any party found to be manufacturing, using, or selling any article which infringes the company’s intellectual property.