Table of Contents
Advertisement
2.3
Display
(2)
rH
(1)
mbar
ATC
ok
CAL
(5) (6) (7)
(1) Main display:
pH value, redox value (mV, mV
(2) Display elements to represent
minimum / maximum / stored measurement (HOLD).
(3) Display of the unit of measurement.
(4) Warning signal:
to indicate a low battery or need for recalibration.
(5) ATC arrow:
in the operating modes "pH", "mV
temperature sensor is connected and the automatic temperature
compensation is active.
(6) OK arrow:
this indicates that the measurement was stable for a sufficiently long time.
(7) CAL arrow:
in "pH" operation, this indicates that the instrument is in calibration mode.
(8) Subsidiary display:
Temperature measurement or operator prompting.
mV
mV
pH
H
(4)
AL Logg
pH
(8)
), rH value or operator prompting.
H
" or "rH", this indicates that the
H
2 General
(3)
7
Advertisement
Table of Contents
