Checking The Device Basic Configuration - Zte ZXR10 5900E Series Routine Maintenance

For example:
ZXR10#show ftp-server
--------------------------------------------------------------------
FTP-server run state: disable
FTP-server listen port:
FTP-server user top directory : /flash/
FTP-server user top directory access permissions: read-write copy
FTP-server ACL-name IPv4:
FTP-server ACL-name IPv6:
FTP-server max online user number: 40
User-ID Username
--------------------------------------------------------------------
2. Run the show ip ospf command to check the configuration related to OSPF.
In normal situations, the displayed router-ids should be the same as the configured
router-ids.
If a router-id is modified but the OSPF process is not restarted, while the previous
router-id is used by another equipment as its router-id, a fault will occur due to an
OSPF router-id collision. Prevent such faults.

4.7 Checking the Device Basic Configuration

Purpose
This topic describes how to check the equipment basic configuration to ensure that the
equipment is working properly.
Step
Back up the configuration file.
Reference Standard
For the details about backup, refer to the ZXR10 5900E configuration guide or ZXR10
5900E product upgrading guide.
SJ-20150114102049-013|2015-01-15 (R1.0)
Status
Note:
Chapter 4 Monthly Maintenance Items
IP-address Port
4-5
ZTE Proprietary and Confidential