Siemens SIMOGEAR BA 2030 Operating Instructions Manual page 51
Gearbox
Hide thumbs
Also See for SIMOGEAR BA 2030:
Table of Contents
Advertisement
Procedure
1. Assemble the mounting kit ① - ⑤.
2. Screw on the unit with the screwed connection ⑤ at the uppermost drill hole of the gearbox
housing or of the motor bearing shield.
3. Align the oil expansion unit so that it is vertical.
Oil expansion unit size 109 - 189
NOTICE
Hose with leaks
The hose of the oil expansion unit is subject to a natural aging process.
Check the hose for tears or leaks.
Never commission a leaky hose. Replace the hose, if necessary.
The hose of the oil expansion unit is not suitable for the ambient temperatures below -
25 °C.
If the ambient temperatures differ, contact Technical Support.
The unit is supplied as a mounting kit. The installation is described in the supplied Compact
Installation Instructions KA 2530-1.
Figure 5-3
BA 2030 (2KJ4)
Operating Instructions, 07/2020, A5E50009094A/RS-AL
Example of an oil expansion unit size 109-189
Commissioning
5.3 Mount the oil expansion unit
49
Advertisement
Table of Contents
