Siemens SIMOGEAR BA 2030 Operating Instructions Manual page 28

Installation
4.2 General information on installation
NOTICE
Malfunction resulting from foreign objects
The operator must ensure that no foreign objects impair the function of the gearbox.
NOTICE
Damaged components impair the correct function of the gearbox
If any components are damaged, the correct function of the gearbox will no longer be
ensured.
Do not install any damaged gearbox components.
NOTICE
Violation of the maximum permissible oil sump temperature
The oil sump temperature may be exceeded if the temperature monitoring equipment is
incorrectly set.
An alarm must be output when the maximum permissible oil sump temperature is reached.
The geared motor must be switched off when the maximum permissible temperature is
exceeded. If the geared motor is shut down, then this can cause the machine to come to a
stop.
Exercise particular care during mounting and installation. The manufacturer cannot be held
liable for damage caused by incorrect mounting and installation.
Make sure that there is enough space around the gearbox or geared motor for mounting,
maintenance and repair.
On geared motors with a fan, leave enough free space for the entry of air. Observe the
installation conditions for the geared motor.
Provide sufficient lifting gear at the beginning of mounting and fitting work.
Observe the mounting position specified on the rating plate. This ensures that the correct
quantity of lubricant is provided.
Use all the fastening methods that have been assigned to the particular mounting position
and mounting type.
Cap screws cannot be used in some cases due to a lack of space. In such cases, please contact
Technical Support quoting the type of gearbox.
26
Operating Instructions, 07/2020, A5E50009094A/RS-AL
BA 2030 (2KJ4)