General Safety Instruction; General Instructions; Precautions During Operation; Residual Risks - EBARA MMD Series Instruction Manual

L L 0 0 0 0 1 / E B – R e v . G –
L L 0 0 0 0 1 / E B – R e v . G –
CHAPTER 3
GENERAL SAFETY INSTRUCTIONS

3.1 General Instructions

The pump(s) should be used only for the applications specified
in par. 1.2. Recommended operational limits must be strictly
observed. In case of applications not specified on this
manual, please contact Ebara Pumps Europe to check for pump
suitability,
installation safety and pump life.
We recommended to install the pump in a safe place.
ATTENTION
In case of emergency, switch off line voltage and warn service
personnel.

3.2 Precautions during Operation

Never put your hands or any kind of object into pump
openings where the shaft rotates (see side picture).
Protect motor and electric parts in general according to
current regulations.
If warm is pumped, do not touch the pump.

3.3 Residual Risks

Take care not to:
Kick the pump.
Pressurize the pump beyond recommended limits.
Use the pump unproperly.
Damage the pump by wrong handling.
1 0 / 2 0 1 7 I T A / G B / F R
1 0 / 2 0 1 7 I T A / G B / F R
6