Table of Contents
Advertisement
Available languages
Available languages
INSTRUCTION MANUAL REGARDING USE AND MAINTENANCE
PART 1
TO BE KEPT BY THE USER
1. INTRODUCTION
Follow the instructions given in these booklets in order to obtain opti-
mum return and operation from your motor-driven pump. If any other
EN
information is necessary, please contact the nearest authorised retailer.
THE REPRODUCTION, EVEN PARTIAL, OF THE ILLUSTRATIONS
AND/OR TEXT HEREIN IS FORBIDDEN.
The following symbols are used throughout the instruction booklets:
WARNING!
Risk of damaging the pump or the system
Risk of injuring people or damaging things
Risks of an electrical nature
2. CONTENTS
2. CONTENTS
7. INSTALLATION, DISMANTLING AND TRANSPORTATION page 7
13. DECLARATION OF CONFORMITY
3. MANUFACTURER IDENTIFICATION DATA
3.1. MANUFACTURER DATA
EBARA PUMPS EUROPE S.p.A.
Registered office:
Via Campo Sportivo, 30 - 38023 CLES (TN) ITALY
Telephone: 0463/660411 - Telefax: 0463/422782
Assistance Service:
e-mail: tcs@ebaraeurope.com
Tel. +39 0444 706968
4. GUARANTEE AND TECHNICAL ASSISTANCE
THE GUARANTEE IS RENDERED NULL AND VOID IF THE IN-
STRUCTIONS GIVEN IN THIS BOOKLET ARE NOT ADHERED
TO AND/OR IF ANYONE OTHER THAN PERSONNEL FROM OUR
HELP CENTRES INTERVENES ON THE MOTOR-DRIVEN PUMP.
IN THESE CASES, THE MANUFACTURER IS RELIEVED FROM
ALL RESPONSIBILITY REGARDING INJURY TO PEOPLE AND
SUBSEQUENT DAMAGE TO ADJACENT ITEMS AND/OR THE MO-
TOR-DRIVEN PUMP ITSELF.
Once you have received the motor-driven pump, make sure that the packag-
ing is not broken or seriously damaged. If it is, immediately inform the person
who delivered it. After extracting the motor pump from its packaging, make
sure that it was not damaged during transportation. If it has been, inform the
retailer within 8 days from delivery. Check the motor-driven pump plate to
6
ensure that the indicated characteristics are those requested by you.
The following parts, being normally subject to wear, have a limited guarantee:
• bearings
• mechanical seals
• grommets
• capacitors
If a fault that is not listed in the "TROUBLESHOOTING" table (chapter
10.1.) occurs, please contact the nearest authorised retailer.
5. GENERAL SAFETY WARNINGS
Before starting the motor-driven pump, the user must follow the operations
indicated in this manual, and apply them each time the motor-driven pump
is used or when maintenance is carried out on it.
5.1. PREVENTIVE MEASURES TO BE TAKEN BY THE USER
Users must observe the accident prevention regula-
tions that are in force in their countries at the time.
They must also pay attention to the motor-driven pump
characteristics.
Always wear protective gloves when handling the
pump or performing maintenance.
While repairing or carrying out maintenance on the
motor-driven pump, disconnect the electric supply.
Doing this avoids accidental starting, which could
injure people and/or cause damage.
page 6
The device can be used by children aged above 8
page 6
years and by persons with reduced physical, sensory
page 6
or mental abilities, or who lack adequate experience
page 6
and knowledge of the product, provided that they are
page 6
supervised or have been adequately instructed on
page 7
its safe use and the relevant risks involved. Children
must not play with the device. Cleaning and main-
page 7
tenance to be carried out by the user must not be
effected by unsupervised children.
page 8
page 8
Any maintenance, installation or handling carried
page 9
out on the motor-driven pump while it is still being
page 9
powered can seriously injure, or even kill, people.
page 83
When starting the motor-driven pump, users must en-
sure that their feet are not bare or, worse, immersed
in water. They must also ensure that their hands are
not wet.
Users must not operate or carry out any work on the
motor-driven pump that is not permitted in this manual.
Stop operation in case pump is in failure. Operation of
broken pumps can cause injury or damage property.
5.2. IMPORTANT PROTECTIONS AND CAUTIONS
All motor-driven pumps are designed in such a way
that all moving parts are made safe by using guards.
The manufacturer declines any responsibility in the
event of damages caused by the removal of said pro-
tections.
Each conductor or powered part is electrically insula-
ted with regards to earth. Extra security is also added
by connecting the accessible conducting parts to an
earth conductor. This ensures that accessible parts
cannot become dangerous should the main insula-
tion become faulty.
5.3. USE FOR WHICH PUMPS ARE DESIGNED
The motor-driven pumps can be used for:
Advertisement
Chapters
Table of Contents
