Keyboard Emulation Mode - Welch Allyn SCANTEAM 3210 Series Operating Manual And Programming Menu

The Keyboard Style Table below applies to
Note:
SCANTEAM 3210 software prior to software
revision level 2.0.
Keyboard Style
(If terminal is not listed, then no secondary type keyboard is supported.)
Terminal Primary Secondary
IBM PC/XT XT CAPS LOCK
IBM PC/AT AT CAPS LOCK
IBM PS2 (50-80) NORM CAPS LOCK
[ ASCII function codes (00-1F) are sent to the terminal via a CTRL+" sequence

Keyboard Emulation Mode

(For IBM PC/AT – terminal ID = 03 – only)
ENTER Program Mode
Scan the bar codes below to program Keyboard Emulation
Mode, then enable or disable the selection.
Keyboard Emulation Selection
Enable
EXIT Program Mode
Tertiary Quaternary
SHIFT LOCK CTRL " + ASCII [
SHIFT LOCK CTRL " + ASCII [ Gr DOS SHIFT LOCK
SHIFT LOCK CTRL " + ASCII [
(i.e. `CR'=CTRL+M)
Keyboard Emulation Mode
Additional Programming
Quinquenary
Gr DOS SHIFT LOCK
Gr DOS SHIFT LOCK
Disable
3–21