The 3210 terminal interface will be set up. To program
a carriage return (CR) suffix see Section 2.4. To turn off
the carriage return (or any other suffix), see Section 2.5
(Clear Bar Code Suffix).
Terminal Selection Programming Example
You want to connect the SCANTEAM 3210 to an Esprit
terminal, model 400. The Supported Terminals Chart
(next page) lists a terminal I.D. number of "03" for the
Esprit 400 terminal.
First , scan "Program Terminal Interface" bar code
(on page 2–11)
Then , scan the Terminal I.D. number bar codes
"0" and "3."
The 3210 has been set up, and will transmit data to the
Esprit 400.
.
Quick Start Programming
2–9