Welch Allyn SCANTEAM 3210 Series Operating Manual And Programming Menu page 141

Version E Expand, 3-51
Version E0, 3-49
Version E1, 3-50
RS-232 Programming,
3-63 3-67
Beeper Selection, 3-64
CTS Handshake Selection,
3-67
Data Format Selection, 3-66
Parity Selection, 3-65
S
Sample Bar Code, Code 3 of 9,
2-4
Saving Programming Selections,
3-1, 3-3
Scan Rate, 5-2
Scanner Identification, 1-3
Scanner Performance, 5-2
Field Width, 5-2
Illumination, 5-2
Minimum Reflective Difference
(MRD), 5-2
Pitch, 5-2
Resolution, 5-2
Scan Rate, 5-2
Skew, 5-2
Working Distance, 5-2
Scanning Technique
Aiming the Illumination Beam,
1-7
Multiple Bar Codes, 1-8
Single Bar Code, 1-7
Scanning Techniques, 1-7
SCANTEAM 3210
EEPROM Memory, 3-1
Features, 1-1
FLASH Memory, 1-1
Index
vi
Instant Interface, 1-1
Model Identification, 1-3
Scanner Connection, 1-4
Scanner Identification, 1-3
Scanning Techniques, 1-7
Unpacking, 1-2
Serial Number. See Identification
Label
Setting Up Terminal Interface.
See Terminal Selection
Programming
Size. See General Dimensions
Skew Angle, 5-2
Standby Current, 5-1
Status Check, 3-81
Show Formats, 3-81
Show Software Revision, 3-81
Stopping Programming Sequence,
3-3
Storage Temperature, 5-1
Supported Interface Keys, 4-1
IBM AT and PS/2 Compatibles,
4-3
IBM XT and Compatibles, 4-4
Supported Terminals. See
Terminal Selection
Programming
Symbology Bar Codes, 3-9, 3-13
Symbology Chart, 3-8, 3-12
T
Terminal I.D. Number, 2-7, 2-8,
2-9, 2-11
Terminal Selection Menu. See
Terminal Selection
Programming
Terminal Selection Programming,
2-1, 2-7
Example, 2-9