Welch Allyn SCANTEAM 3210 Series Operating Manual And Programming Menu page 29

2.4 Program Carriage Return (CR) Suffix
If your application requires a carrage return (CR) suffix,
scan the bar code below to Program a Carriage Return
for all enabled bar code symbologies.
Program Carriage Return Suffix
Caution: Scanning this code clears all previously programmed prefixes
and suffixes.
2.5 Clear Bar Code Suffix
If your application doesn't need a bar code suffix (such as
carriage return – CR), you may scan the bar code below to
clear Bar Code Suffix.
Clear Bar Code Suffix
2.6 Reset Factory Settings
Scan the bar code below to reset the SCANTEAM 3210
scanner to the factory settings. The factory settings are
indicated by " " (asterisks) on the programming menu
pages (Chapter 3).
Factory Default Settings
2–12 Quick Start Programming