Welch Allyn SCANTEAM 3210 Series Operating Manual And Programming Menu page 55

Output Mode Selection, continued
Function Code Transmit Enabled Example
The SCANTEAM 3210 is connected to an IBM PC XT
and is programmed as follows:
Bar Code Prefix: GS (1D)==>F10 key
Bar Code Suffix: CR (0D)==>ENTER key
Function Code Transmit, enabled
When a bar code containing the characters "1234<HT>5678" is
scanned, the 3210 will output the following to the terminal / computer:
1 2 3 4 < TAB > 5 6 7 8
F10
bar code
prefix
The Supported Interface Key "HT" (IBM XT table page 4–4) has
been translated and sent as the "TAB" key.
Function Code Transmit Disabled Example
The SCANTEAM 3210 is connected to an IBM PC XT
and is programmed as follows:
Bar Code Prefix: GS (1D)==>F10 key
Bar Code Suffix: CR (0D)==>ENTER key
Function Code Transmit, disabled
When a bar code containing the characters "1234<HT>5678" is
scanned, the 3210 will output the following to the terminal / computer:
F10 1 2 3 4 5 6 7 8
bar code
prefix
The "HT" has been stripped from the data string. (The preamble
and postamble are not affected by Function Code Transmit.)
3–26 Additional Programming
ENTER
bar code
suffix
ENTER
bar code
suffix