Welch Allyn SCANTEAM 3210 Series Operating Manual And Programming Menu page 138

In-Rush Current, 5-1
Industrial Symbologies Min/Max
Length Chart, 3-47
Industrial Symbology
Programming, 3-30 3-47
Codabar Selection, 3-31
Check Character Required,
3-32
Check Character Transmit,
3-32
Concatenation, 3-33
Concatenation Required,
3-33
Start/Stop Transmit, 3-32
Code 11 Selection, 3-42
2 Check Digits Required?,
3-43
Code 128, EAN-128
Programming, 3-46
Code 128 Selection, 3-45
Code 2 of 5 Selection, 3-40
Code 39 Selection, 3-35
Append Option, 3-37
Check Character Required,
3-36
Check Character Transmit,
3-36
Full ASCII, 3-37
Start/Stop Transmit, 3-36
Code 93 Selection, 3-44
Disable All Symbologies, 3-46
Interleaved 2 of 5 Selection,
3-38
Check Digit Required, 3-39
Check Digit Transmit, 3-39
Matrix 2 of 5 Selection, 3-41
Min/Max Length Chart, 3-47
Inspecting Cords and Connectors,
6-1
Interface Cable Connection. See
Connecting the Scanner
Interface Cable Replacement. See
Replacing the Interface Cable
K
Keyboard Function Codes, 4-1
Keyboard Function Relationships,
4-1
Keyboard Style Chart, 3-20,
3-21
L
LED Illumination, 5-2
Length. See General Dimensions
Limited Warranty, 6-9
List of Plug and Play" codes. See
Plug and Play" Programming
M
Maintenance, 6-1
Cleaning the Scan Window,
6-1
Inspecting Cords and
Connectors, 6-1
Replacing the Interface Cable,
6-2
Mean Time Between Failures
(MTBF), 5-1
Mechanical Shock, 5-1
Minimum Reflective Difference
(MRD), 5-2
Model Identification, 1-3
Interface Option, 1-3
Scan Rate, 1-3
Index
iii