Welch Allyn SCANTEAM 3210 Series Operating Manual And Programming Menu page 128

To Reset Factory Settings
If you aren't sure what programming options have been set
up in the 3210, or you've changed some options and now
want the factory settings restored, see Section 2.4 and scan
the "Factory Default Settings" bar code.
If All Else Fails...
If you are still experiencing problems,
call your Distributor or Welch Allyn:
315–685–8945
(8 a.m. to 4:30 p.m. EST)
(For more information on Customer Support
or Warranty information see the two sections
following this chapter.)
Maintenance and Troubleshooting 6–5