Welch Allyn SCANTEAM 3210 Series Operating Manual And Programming Menu page 101

Format Editor Commands Chart
Send Commands
F1 Send all characters followed by XX" key or function code, starting from
current cursor position. Syntax = F1XX (XX = HEX ASCII character or
function code 00-FE HEX).
F2 Send NN" characters followed by XX" key or function code, starting from
current cursor position. Syntax = F2NNXX (NN = number of characters
00-99 DEC, XX = HEX ASCII character or function code 00-EF HEX).
F3 Send up to but not including SS" character (Search and Send) starting
from current cursor position, leaving cursor pointing to SS" character
followed by XX" key or function code. Syntax = F3SSXX (SS = HEX ASCII
Character 00-7F HEX, XX = HEX ASCII character 00-7F HEX).
F4 Send XX" character NN" times (Insert) leaving cursor in current cursor
position. Syntax = F4XXNN (XX = HEX ASCII character 00-7F HEX, NN =
number of characters 00-99 DEC).
Move Commands
F5 Move cursor ahead NN" characters from current cursor position.
Syntax = F5NN (NN = number of characters 00-99 DEC).
F6 Move cursor back NN" characters from current cursor position.
Syntax = F6NN (NN = number of characters 00-99 DEC).
F7 Move cursor to the beginning of the data string. Syntax = F7.
Search Commands
F8 Search ahead for XX" character from current cursor position, leaving
cursor pointing to XX" character. Syntax = F8XX (XX = HEX ASCII
character 00-7F).
F9 Search back for XX" character from current cursor position, leaving cursor
pointing to XX" character. Syntax = F9XX (XX = HEX ASCII character
00-7F).
Miscellaneous Commands
FA Leading zero suppress on. Suppress leading zeroes from current cursor
position until first non-zero character. Syntax = FA.
FB Suppress XX" character(s) (up to three) starting from current cursor
position until suppress disable command FC" or end of format. Syntax =
FBXXFB, FBXXXXFB, FBXXXXXXFB (XX = ASCII character 00-7F).
FC Disable suppress filter and clear all suppressed characters. Syntax = FC.
FE Compare character in current cursor position to the character XX." If
characters are equal, increment cursor. If characters are not equal, no
format match. Syntax = FEXX (XX = HEX ASCII character 00 -7F).
3–72 Additional Programming