Non-Hitachi Rack Support; Hitachi Universal V2 Rack Rail Kits - Hitachi Virtual Storage Platform G350 Site Preparation Manual

Component
CBL
CBL
CBL
CBL
Physical SVP

Non-Hitachi rack support

The storage system supports non-Hitachi racks that meet Hitachi specifications.
Observe the following mounting guidelines for non-Hitachi racks:
The VSP Gx00 models VSP Fx00 models support any 4-post, EIA-310-D compliant rack
■
that has adequate airflow and weight capacity.
PDUs must be mounted properly to avoid any issues while servicing the storage
■
system. The PDU receptacles must face toward the back (not toward each other). The
area behind the storage system and between the vertical 19-inch mounting posts
must be free of PDUs and cable loops.

Hitachi Universal V2 Rack rail kits

Use rail kits to mount the Hitachi Virtual Storage Platform family storage system in a
Hitachi Universal V2 Rack.
The following tables list the rail kit information for the specified storage systems.
Rail kit
Controller
DBS, DBL, and DBF drive
trays
Site Preparation Guide for VSP G/F350, G/F370, G/F700, G/F900
Table 3 CBL and physical SVP
Drive trays
48 SFF drive trays
48 LFF drive trays
48 FMD drive trays
24 dense intermix drive trays
N/A
Table 4 Rail kits for VSP Gx00 models VSP Fx00 models
Hitachi Universal V2 Rack
1
UNI
2
CGR
Chapter 1: Installation site considerations
Non-Hitachi rack support
Weight
2829 kg
(6236.9 lbs)
2810 kg
(6195 lbs)
3251 kg
7167.2 lbs
3717 kg
(8194.6 lbs)
4.5 kg
(10 lbs)
Third-party rack
1
UNI
1
UNI
41