Starting The Beck Tool - Hitachi Virtual Storage Platform G350 Site Preparation Manual

Create button
Reset button
Base button
Save button
Load button
DKB Option ON
DKB Option OFF

Starting the BECK tool

Procedure
1. Store the executable file on your computer's desktop.
2. In the BECK_Tool_wxyz folder, run the BECK executable file BECK_Tool.exe.
Site Preparation Guide for VSP G/F350, G/F370, G/F700, G/F900
Screen element
Chapter 1: Installation site considerations
Starting the BECK tool
Description
Creates the configuration edited in the
logical and physical configuration
figures. Displays units, unit IDs, and box
codes in the logical and physical
configuration figures.
Resets the created configuration (units,
unit IDs, and box codes). If you load a
simple trace, clicking this button
redisplays the configuration screen that
was shown after the simple trace was
loaded. If loading a configuration
information file, the configuration
screen displayed after the configuration
information file was loaded is
redisplayed.
Displays units and unit IDs in the
Logical and Physical configuration
figures automatically created after you
enter the number of LFF, SFF, FMD, and
dense intermix drive trays.
Saves configuration information to a
CSV file.
Loads configuration information from a
CSV file.
DKB Option ON is selected in the
Configuration screen. The number of
back end modules is assumed to be 8
per system. The number is updated
after a configuration is created.
DKB Option OFF is selected in the
Configuration screen. The number of
back end modules is assumed to be 4
per system. By default, the DKB Option
OFF is selected. The number is updated
after a configuration is created.
20