Hitachi Virtual Storage Platform G350 Site Preparation Manual page 35

Message
Two or more units are set to
path 0 than path 1.
Two or more units are set to
path 1 than path 2.
Two or more units are set to
path 2 than path 3.
Unit of path 0 side skips one or
more units.
Unit of path 1 side skips one or
more units.
Unit of path 2 side skips one or
more units.
Unit of path 3 side skips one or
more units.
The total size of mounted units
exceeds the rack size.
The Controller Box location
cannot be changed.
Log file loading has failed.
Log file contains inaccurate
information.
Chapter 1: Installation site considerations
Site Preparation Guide for VSP G/F350, G/F370, G/F700, G/F900
Corrective action
In the Logical configuration figure, set the
same number of units to path 0 and path
1, or set one more unit to path 0 than
path 1.
In the Logical configuration figure, set the
same number of units to path 1 and path
2, or set one more unit to path 1 than
path 2.
In the Logical configuration figure, set the
same number of units to path 2 and path
3, or set one more unit to path 2 than
path 3.
In the Logical configuration figure, do not
have space between the units in path 0.
In the Logical configuration figure, do not
have space between the units in path 1.
In the Logical configuration figure, do not
have space between the units in path 2.
In the Logical configuration figure, do not
have space between the units in path 2.
Re-examine the size of each rack or
reallocate the units to fit the allowed size
of each rack.
The controller location is nontransferable.
Do not click there.
Provide sufficient space for storing the
■
trace file.
Check access authorization to the
■
folder.
Check whether another application is
■
trying to access the folder that contains
the trace file.
Confirm whether there are trace files
■
other than the input file in the folder.
Trace file may be corrupt. Re-examine
■
the trace file.
Confirm that the trace file is from a VSP
■
G700 or VSP F700.
BECK tool messages
35