Performing A Complete Scan - TechniSat DIGITRADIO 10 IR Manual

9.2.1 Performing a complete scan

The automatic scan (Complete scan) scans all DAB+ band III channels and
thereby finds all stations being broadcast within the reception area.
After the scan is complete, the first station is played back in alphanumeric
order.
> In order to perform a complete scan, press the SCAN button on the remote
control.
Alternatively:
> Open the MENU > [Scan settings] > [Complete scan] and press the OK
button.
> [Scanning...] appears in the display.
During the scan a progress bar and the number of stations found is displayed.
If no stations are found, check the dipole antenna and change the installation
location if required (Section 6.3.1).
DE
EN
NL
FR
115