TechniSat DIGITRADIO 10 IR Manual page 113

> In the next step you can specify whether the DIGITRADIO 10 IR should remain
connected to the Internet when on standby. This can, for example, be useful
for App control (Spotify Connect). Power consumption is, however, increased
by using the standby mode.
> The network wizard then starts and you can set up an Internet connection.
Use the / and OK buttons to select the WiFi network you recognise and
enter the relevant password using the displayed keyboard (skip WPS). Then
select
connection to the network is now established. The signal bar
bar of the display indicates whether the connection has been established. To
cancel the entry, select
error you can delete the last letter entered using
While the virtual keyboard is displayed, you can use / on the remote
control to navigate. The / buttons move the highlight upwards and
downwards, the / buttons move the highlight to the right and left.
and press the OK button. If the password entered is correct a
and press the OK button. If you make a typing
in the status
.
113
DE
EN
NL
FR