Dab+ Radio; Performing A Complete Scan - TechniSat DIGITRADIO UP 55 Instruction Manual

9 DAB+ radio

> To select DAB+ as the playback source, first open the main menu. Use << or
>> to select the Source item and tap on OK/NAV. You can then use << or >>
to select [DAB] as the playback source and play the last station listened to by
tapping on OK/NAV.
If DAB+ is being started for the first time, a complete scan will be performed.
After the scan is complete, the first station is played back in alphanumeric order.

9.1 Performing a complete scan

The automatic scan (Complete scan) scans all DAB+ band III channels and
thereby finds all stations being broadcast within the reception area.
After the scan is complete, the first station is played back in alphanumeric order.
> To run a full scan, first open the main menu. Use the << or >> touch fields to
select the [Full Scan] menu item, then tap on OK/NAV.
> [Scanning...] appears on the display.
During the scan a progress bar and the number of stations found is displayed.
86