TechniSat DIGITRADIO 10 IR Manual page 132

> The display will show [Bluetooth] and [Please pair].
> Now start the search for Bluetooth devices nearby on your external device.
You may need to enable the Bluetooth feature on your external device first.
Please refer to the operating instructions for your external device to activate
the Bluetooth function and perform a search on your external device.
During the pairing process, both devices should be within 10 cm of each other.
> The entry DIGITRADIO 10 IR should now appear in the list of Bluetooth
devices found on your external device. Tap on the name of the radio
to complete the pairing process. If the pairing process is successful, a
confirmation tone sounds from the DIGITRADIO 10 IR's speaker.
> Depending on the external device, its name now appears on the display of the
DIGITRADIO 10 IR. You can now start playing music on your external device.
132