System Info - TechniSat DIGITRADIO 10 IR Manual

> Press the MENU button and use the / buttons to select the [System
settings] > [Factory settings] item, then press OK.
> Use / to select the [Yes] option, then press OK to reset to the factory
settings.
All previously stored stations and settings will now be deleted. The device is
now in the same status as when delivered.
> The display will show [Restart ...] and the device will start using the
language selection [Language]. Please refer to the information in Section „8
Ersteinrichtung" auf Seite 112.

16.6 System info

Under Software version you can retrieve the currently installed software version.
> Press the MENU button and use the / buttons to select the [System
settings] > [System info] item, then press OK.
> The current software version is displayed.
150