Advertisement
Step 1: Choose a Location
Place the autosampler close to the ICP-MS or other analytical instrument. Place
the autosampler where space, liquid waste, and power requirements can be
met. If you have not already evaluated the intended location for the
autosampler, see the Operator's Manual.
Step 2: Unpack the Autosampler
Inspect all components for shipping damage.
1
Place the tray on the autosampler base.
2
Mount the rinse station.
3
Step 3: Mount the Z-Drive
The Z-drive moves the probe up and down. The Z-drive is shipped detached
from the autosampler.
Carefully unpack the Z-drive.
1
Figure 3 Z-Drive Before Installation
Find the Y-axis carriage on the arm of the autosampler. The Z-drive will be
attached to this carriage.
2
Figure 4 Y-Axis Carriage
4
Advertisement
