Recommended Technical Support For Various Spare Parts; Screw Tightening Torque (Lb-Ft) Specifications - R&M LOADMATE LM Series Installation And Maintenance Manual
Recommended Technical Support for Various Spare Parts
Table 8. Recommended Technical Support for Various Spare Parts
SPARE PART
Upper chain guide
Output shaft
PG cable gland
Gear shaft + nuts
Motor end cap
Gearing (1st/2nd stage)
Brake & end cap sealing
Other seals and O-rings
Brake-limiter
Brake end cap
Lower chain guide
Rubber buffer
Electric box
PC-board
Plugs
Chain
Chain bucket
Slack fall stop
Suspension hook
Hook block assembly
Control box
Note: Once a part has been replaced, perform an operational check of hoist per Sections 3.3
and 3.4.
6.4
Screw Tightening Torque (lb-ft) Specifications
Table 9. Screw Tightening Torque Specifications
STANDARD SCREWS
SELF-TAPING SCREWS
This document and the information contained herein, is the exclusive property of R&M MATERIALS HANDLING, INC. and represents a non-public, confidential and proprietary trade secret
that may not be reproduced, disclosed to third parties, altered or otherwise emplo yed in any manner whatsoever without the express written consent of R&M MATERIALS HANDLING, INC.