Recommended Technical Support For Various Spare Parts; Screw Tightening Torque (Lb-Ft) Specifications - R&M LM Installation And Maintenance Manual

Hide thumbs Also See for LM:

Installation and maintenance manual (71 pages)

Table Of Contents

Table of Contents

LM10 I&M MANUAL/EN/11.30.2010

8.3

Recommended technical support for various spare parts

Table 7. Recommended Technical Support for Various Spare Parts

SPARE PART

Upper chain guide

Output shaft

PG cable gland

Gear shaft + nuts

Motor end cap

Gearing (1st/2nd stage)

Brake & end cap sealing

Other seals and O-rings

Brake-limiter

Brake end cap

Lower chain guide

Rubber buffer

Electric box

PC-board

Plugs

Chain

Chain bucket

Slack fall stop

Suspension hook

Hook block assembly

Control box

NOTE:

Once a part has been replaced, perform an operational check of hoist per

Sections 3.3 and 3.4.

8.4

Screw Tightening Torque (lb-ft) Specifications

Table 8. Screw Tightening Torque Specifications

TYPE

STANDARD SCREWS

SELF-TAPPING SCREWS

R&M Materials Handling, Inc. | 4501 Gateway Boulevard, Springfield, Ohio 45502 | PH: 1-937-525-5100 | FAX: 1-937-325-5319

This document and the information contained herein, is the exclusive property of R&M Materials Handling, Inc., and represents a non-public, confidential and proprietary trade secret

that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of R&M Materials Handling, Inc.

REPLACED BY

Qualified Electrician & Mechanic

Qualified Electrician

Qualified Mechanic

Qualified Electrician & Mechanic

Qualified Mechanic

Qualified Electrician

Qualified Mechanic

Qualified Electrician

Qualified Mechanic

Qualified Electrician

M10