Recommended Operator Qualifications - R&M LOADMATE LM01 Operator's Manual

Electric Chain Hoist Operator's Manual/EN/11.30.10
3.4

Recommended Operator Qualifications

HOIST OPERATORS SHALL:
Be required to read this manual (Electric Chain Hoist Operator's Manual).
Be required to read the warnings in Installation and Maintenance Manual supplied with hoist.
Be required to read the instructions and warning labels on the hoist.
Be required to read the operating section of ASME B30.16.
Be required to be familiar with the hoist controls before being authorized to operate the
hoist.
Be trained in proper rigging procedures to be followed in the attachment of loads to
the hoist load hook.
Be trained and be familiar with any below-the-hook devices that may be used in
lifting of loads.
Be trained to be aware of potential malfunctions of the hoist that may require adjustment
or repair.
Be instructed to stop operation if malfunctions occur, and to immediately advise their
supervisor so corrective action can be taken.
HOIST OPERATORS SHOULD:
Have normal depth perception, field of vision, reaction time, manual dexterity, and
coordination for the work to be performed.
NOT be subject to seizures, loss of physical control, physical defects, or emotional
instability that could result in actions of the operator being a hazard to the operator or
others.
NOT operate a hoist when under the influence of alcohol or drugs.
NOT operate a hoist when under the influence of medication that could result in actions
of the operator being a hazard to the operator or others.
This document and the information contained herein, is the exclusive property of R&M MATERIALS HANDLING, INC. and represents a non-public, confidential and proprietary trade
secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of R&M MATERIALS
HANDLING, INC. . Copyright © (2010) R&M MATERIALS HANDLING, INC. . All rights reserved.
10/41