Preventative Maintenance; Maintenance And Inspection Table - R&M LOADMATE LM Series Installation And Maintenance Manual

Hide thumbs

Table Of Contents

Table of Contents

LM01 I&M MANUAL/EN/11.30.2010

PREVENTATIVE MAINTENANCE

6.1

Maintenance and Inspection Table

Table 6. Maintenance and Inspection Schedule

INSPECTION CHECK

BRAKE OPERATION FOR HOLDING AND RELEASING

LOAD CHAIN FOR DAMAGE

SUSPENSION SUPPORT OF P/B ASSEMBLY

CLEANLINESS & LUBRICATION OF LOAD CHAIN

UPPER / LOWER LIMIT SWITCHES

CHECK LOAD CHAIN FOR WEAR – MEASURE AND RECORD

CHECK HOOKS FOR WEAR – MEASURE AND RECORD

CHECK LOAD BLOCK HARDWARE TO VERIFY TIGHTNESS

CHECK TOP HOOK / COUPLING HARDWARE FOR TIGHTNESS

CHECK SLIP CLUTCH & HOIST BRAKE ADJUSTMENT

CHECK LUBRICATION OF OPEN WHEEL GEARING

CHECK WIRE TERMINALS TIGHTNESS

LUBRICATE 2-FALL LOAD BLOCK SPROCKET

CHECK ALL HARDWARE FOR TIGHTNESS AND CORROSION

CLEAN MOTOR COOLING FINS

LUBRICATE ALL GEARING

INSPECT LOAD BLOCK THRUST BEARING

CAUTION: INSPECTION AND MAINTENANCE INTERVALS SHOULD BE ADJUSTED BASED

UPON OWNER / USER KNOWLEDGE OF APPLICATION, ENVIRONMENT, AND FREQUENCY

OF USE TO PREVENT DAMAGE TO PEOPLE, EQUIPMENT, AND FACILITIES.

This document and the information contained herein, is the exclusive property of R&M MATERIALS HANDLING, INC. and represents a non-public, confidential and proprietary trade secret

that may not be reproduced, disclosed to third parties, altered or otherwise emplo yed in any manner whatsoever without the express written consent of R&M MATERIALS HANDLING, INC.

INTERVAL

DAILY

MONTHLY

DAILY

EVERY 3 MONTHS

QUALIFIED INSPECTOR

EVERY 3 MONTHS

QUALIFIED INSPECTOR

EVERY 3 MONTHS

EVERY 3 -6 MONTHS

QUALIFIED MECHANIC

EVERY 3 -6 MONTHS