Preventative Maintenance; Maintenance And Inspection Table - R&M LOADMATE LM05 II Series Installation And Maintenance Manual

LM05 SERIES II I&M MANUAL/EN/11.30.2010
8

PREVENTATIVE MAINTENANCE

8.1

Maintenance and Inspection Table

Table 11. Maintenance and Inspection Schedule
INSPECTION CHECK
BRAKE OPERATION FOR HOLDING AND RELEASING
LOAD CHAIN FOR DAMAGE
SUSPENSION SUPPORT OF P/ B ASSEMBLY
CLEANLINESS & LUBRICATION OF LOAD CHAIN
UPPER / LOWER LIMIT SWITCHES
CHECK LOAD CHAIN FOR WEAR – MEASURE AND RECORD
CHECK HOOKS FOR WEAR MEASURE AND RECORD
CHECK LOAD BLOCK HARDWARE TO VERIFY TIGHTNESS
CHECK TOP HOOK / COUPLING HARDWARE FOR TIGHTNESS
CHECK SLIP CLUTCH & HOIST BRAKE ADJUSTMENT
CHECK LUBRICATION OF OPEN WHEEL GEARING
CHECK WIRE TERMINALS TIGHTNESS
LUBRICATE 2-FALL LOAD BLOCK SPROCKET
CHECK ALL HARDWARE FOR TIGHTNESS AND CORROSION
CLEAN MOTOR COOLING FINS
LUBRICATE ALL GEARING
INSPECT LOAD BLOCK THRUST BEARING
m
CAUTION: INSPECTION AND MAINTENANCE INTERVALS SHOULD BE ADJUSTED BASED
UPON OWNER / USER KNOWLEDGE OF APPLICATION, ENVIRONMENT, AND FREQUENCY
OF USE TO PREVENT DAMAGE TO PEOPLE, EQUIPMENT, AND FACILITIES.
This document and the information contained herein, is the exclusive property of R&M Materials Handling, Inc., and represents a non-public, confidential and proprietary trade secret that
may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of R&M Materials Handling, Inc.
Copyright © (2010) R&M Materials Handling, Inc. All rights reserved.
INTERVAL
DAILY
DAILY
DAILY
MONTHLY
DAILY
EVERY 3 MONTHS QUALIFIED INSPECTOR
EVERY 3 MONTHS QUALIFIED INSPECTOR
EVERY 3 MONTHS
EVERY 3 MONTHS
EVERY 3 -6 MONTHS QUALIFIED MECHANIC
EVERY 3 -6 MONTHS QUALIFIED MECHANIC
SEMI-ANNUALLY QUALIFIED MECHANIC
ANNUALLY
ANNUALLY QUALIFIED MECHANIC
ANNUALLY QUALIFIED MECHANIC
ANNUALLY QUALIFIED MECHANIC
ANNUALLY QUALIFIED MECHANIC
QUALIFIED PERSON
OPERATOR
OPERATOR
OPERATOR
OPERATOR
OPERATOR
OPERATOR
OPERATOR
OPERATOR
61/89