Festo FB13 Electronic Manual page 43

VIFB13 - 03/05
1
M6
M10
Fig. 2/6: Fitting valve terminal type 05 onto a wall
9809b
2. Fitting
Fasten the terminal as follows:
•
with 3 M10 screws on the adapter plate and
the right-hand end plate (2)
•
with 2 M6 screws on the left-hand end plate
(1)
If necessary, fasten the terminal by means of:
•
the fastening hole on the back of the right-
hand end plate with M10 thread ("blind hole"
(3))
•
the supporting brackets for I/O modules (see
fitting instructions supplied with the brackets)
The ISO valve terminal can be fitted as desired.
Use washers if necessary. Use the M8 thread for
lifting eye bolt (e.g. to avoid damage in transit).
2
M8 thread in end plate
for lifting eye bolt
3
2-13