VIFB13 - 03/05
4-28
4. Commissioning
"
The entry mask "Slave Parameters" will ap-
pear. Select the station type "FESTO type
03 FB13" and confirm this.
#
The icon of the Festo valve terminal will now
appear under the graphic of the master.
The icon appears when you have copied the
bitmap file (see step 3 of the preparations).
Configuration with COM PROFIBUS
Prerequirements:
•
the GSD must be in the directory of your PC
•
the mask "Bus parameter" must be processed
- bus profile
- baud rate
•
the slave station number has been assigned
•
the station type "FESTO type 03 FB13" has
been selected
•
the mask "Configure" has been accessed
9809b