Table of Contents
Advertisement
Load Ranger Wheel Weigh Pad System
3.3
Standard Ai-1 Indicator Functions
3.3.1
Zeroing Weigh Pads with Indicator
The Ai-1 indicator can zero all of the connected weigh pads at once or individually. The
weight is zeroed.
To zero the whole system (all of the connected weigh pads), make sure
To zero an individual weigh pad, the corresponding scale number (example:
The weight value displayed by the indicator also corresponds with scale annunciator (
Note
3.3.2
Tare Options
The tare weight is not subtracted from the displayed gross weight value, but from the sum total of the totalized axles.
Note
The gross, tare and net weight are present when printing on multiple print formats
Semiautomatic Tare
1. Load scale with the tare weight.
2. Press
to tare the gross weight on the scale. The weight value and the
Manual Tare
1. Touch the tare weight cell on the indicator display.
2. Type in the tare weight value and confirm by pressing
Preset Vehicle Tare
1. Press
>>
2. Press
VEHICLES
3. Press a vehicle entry to edit. Example:
4. Press the tare weight entry to edit. Example:
5. Type in the tare weight value and confirm by pressing
6. Press
7. Press
Esc
Tare Cancellation Options
• Press
with the weigh pads unloaded
• Manually set the tare weight value to zero
• Press
18
Visit our website
to switch the indicator display to the secondary weigh screen.
to view the vehicle database.
0001
Tare
to return to the vehicle database. Repeat previous steps if needed for additional tare weights.
to return to the secondary weigh screen.
www.RiceLake.com
is displayed and press
S
) must be displayed, then press
1
. The entered value and the
OK
RLWS TRUCK 1
1000lb
.
OK
annunciator displays if the scale
.
,
,
S
1
(Section 3.8 on page
25).
annunciator display.
PT
annunciator display.
PT
.
, etc.).
2
Advertisement
Table of Contents
